Garmin GPS II Owner's Manual page 46

REFERENCE
Fig. 40a
Fig. 40b
40
Selecting a GOTO Destination
The GPS II provides four ways to navigate to a destination: GOTO, MOB,
TracBack, and route navigation. The most basic method of selecting a destination is
the GOTO function, which lets you choose any stored waypoint as the destination
and quickly sets a direct course from your present position.
To activate the GOTO function:
1. Press GOTO.
2. Select the waypoint you want to navigate to (Fig. 40a), and press ENTER.
Once a GOTO waypoint has been activated, the compass page or highway page
will provide steering guidance to the destination until either the GOTO is cancelled
or the unit has resumed navigating the active route (see page 53).
To cancel an active GOTO:
1. Press the GOTO key.
2. Highlight 'CANCELGOTO?' (Fig. 40b), and press ENTER.