Subscribe to Our Youtube Channel
Related Manuals for Shark CORDLESS VERTEXPRO IZ600 Series
Summary of Contents for Shark CORDLESS VERTEXPRO IZ600 Series
- Page 1 CORDLESS MultiFLEX Vacuum ® with Self-Cleaning Brushroll IZ600 Series OWNER’S GUIDE POWERFINS™...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 22. DO NOT use in the following areas: 32. Keep the battery away from all metal a) Poorly lit areas objects such as paper clips, coins, keys, nails, or screws. Shorting the battery b) Wet or damp surfaces FOR HOUSEHOLD USE ONLY terminals increases the risk of fire or burns. -
Page 3: Li-Ion Battery
ASSEMBLY LI-ION BATTERY The Lithium Ion Power Pack battery does not come fully charged. Prior to first use, charge completely. 1. Insert Wand into Floor Nozzle. During first use, run the battery down until it is completely out of power. This will condition the battery. 2. -
Page 4: Charging The Battery
SETTINGS CHARGING THE BATTERY USING THE LI-ION CHARGER POWER ON/OFF HARD FLOOR SETTING Press power button to turn vacuum on or off. To vacuum in hard floor mode, press the floor select LI-ION CHARGER IN HANDHELD VACUUM button until the hard floor icon ( ) illuminates. -
Page 5: Cleaning Modes
CLEANING MODES USING THE MULTIFLEX® WAND UPRIGHT MODE To clean floors, step on floor nozzle and tilt handheld vacuum back. Press the unlock latch on the back of the wand, Adjust the wand to a lower angle to easily clean then adjust the angle. -
Page 6: Maintaining Your Vacuum
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM EMPTYING THE DUST CUP CLEANING THE FILTERS Regularly rinse and replace the filters to maintain your vacuum’s suction power. To clean filters, rinse them with water only. Allow all filters to air-dry completely before reinstalling to prevent liquid from being drawn into electric parts. -
Page 7: Floor Nozzle
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM FLOOR NOZZLE FLOOR NOZZLE CHECKING FOR BLOCKAGES If any hair is wrapped around the brushroll, continue cleaning using the Carpet setting on a bare floor surface, Checking for Blockages in the Handheld Vacuum: a low-pile carpet, or a small area rug. If some fibers remain wrapped around the brushroll after continued use, carefully remove them. -
Page 8: Troubleshooting Guide
TROUBLESHOOTING GUIDE ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM WARNING: To reduce the risk of shock and unintended operation, turn off 8" Crevice Tool power and remove the Lithium Ion Power Pack battery before servicing. 18" Flexi Crevice Tool Duster Crevice Tool Vacuum is not picking up debris. -
Page 9: Five (5) Year Limited Warranty
FIVE (5) YEAR LIMITED WARRANTY TWO (2) YEAR LIMITED BATTERY WARRANTY The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja The Two (2) Year VIP Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. -
Page 10: Technical Specifications
NOTES REGISTER YOUR PURCHASE sharkclean.com. RECORD THIS INFORMATION TECHNICAL SPECIFICATIONS Voltage: 25.2V Model Number: ����������������������������� Date Code: ��������������������������������� Power: 309W Date of Purchase: ��������������������������� (Keep receipt) Store of Purchase: ��������������������������� TIP: You can find the model and serial numbers on the QR code label on the bottom of the back of the handheld vacuum and battery. - Page 11 PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. This Owner’s Guide is designed to help you get a complete understanding of your new Shark® vacuum. SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-800-798-7398 sharkclean.com Illustrations may differ from actual product.
Need help?
Do you have a question about the VERTEXPRO IZ600 Series and is the answer not in the manual?
Questions and answers
How do you clean out main dust contsiner
To clean the main dust container of the Shark CORDLESS VERTEXPRO IZ600 Series:
1. Remove the dust cup by pressing the CleanTouch™ Dust Cup Release button near the handheld vacuum nozzle, then tilt and lift off.
2. Empty debris by holding the dust cup over a trash receptacle and sliding the CleanTouch™ Dirt Ejector slider forward.
3. Rinse the interior of the dust cup with water only.
4. Place the dust cup on its side with the lid open and let it air-dry for at least 24 hours before reinstalling.
This answer is automatically generated
Can you change the battery on the Shark IZ640 H Vertec Pro?
How can IB purchase replacement filters