8.2
Sharpening
Use quality oil sharpening stones� Lubricate them with an accurate
lubrication solution�
1� Remove the blade (B) from the tool�
2� Place the cutting edge (C) against the sharpening stone at
approximately 25° angle�
3� Slightly lift the blade (B) to a 30° angle�
4� Pull the blade (B) backwards to sharpen the cutting edge�
Repeat until sharpened�
5� Draw the sharpened cutting edge (C) across the corner of a
scrap piece of wood to remove burr�
6� Reassemble the tool�
8.3
Storage
» Store in a cool and dry place away from children and pets,
ideally in original packaging�
25°
EN
30°
11
Need help?
Do you have a question about the B07V3QLMS9 and is the answer not in the manual?