Step 2: Remove The Countertop Stand - Abbott IonicRF Instructions For Use Manual

WARNING: Ensure the pole mount is securely fastened to the
pole before attaching the generator. Failing to secure the pole
mount may cause the product to fall, resulting in injury or
product damage.

Step 2: Remove the Countertop Stand

NOTE: The IonicRF™ generator is supplied with an attached
countertop stand. Before attaching the generator to the pole mount,
the countertop stand must be removed. Always place the generator
on a level surface when adding or removing the countertop stand.
Figure 5. Removing the countertop stand from the generator
1. 1. Using your fingers, fully loosen each of the four captive thumb
screws on the countertop stand until they are disengaged from
the generator.
2. 2. Remove the stand from the generator.
6