Precautions - Abbott IonicRF Instructions For Use Manual

Generator pole mount
Table of Contents

Advertisement

generator may cause the product to fall, resulting in injury or
product damage.
When installed, ensure the top of the generator is no higher
than 139.7 cm (55 in) from the floor.
Do not mount or suspend any item on the roll stand other
than the pole mount and generator.
Do not place any items exceeding 4.4 pounds (2 kilograms)
on the roll stand tray.
Unlock the roll stand wheels before moving the pole-
mounted generator.
Pulling on the roll stand when the wheels are locked may
cause the roll stand to tip or fall, which may cause injury or
interrupt the procedure.

Precautions

The following precautions apply to these components:
Only use the IonicRF™ pole mount with the IonicRF™
generator model RFG‑IONIC and the roll stand
model RD‑0856.
Before moving the roll stand with the generator attached or
using the pole-mounted generator, ensure that any cables
attached to the generator will not become entangled with
other objects or present a tripping hazard.
Two people are required to assemble the generator and pole
mount to prevent the product from falling, resulting in injury
or product damage.
The roll stand assembly requires two people.
Observe caution when moving the pole-mounted generator
to avoid toppling of the device which may cause injury or
product damage.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rf-pole

Table of Contents