WELCOME TO THE TWIN QUICK START GUIDE Thank you for purchasing a Twin Board. Please read the entire guide before using this product. It is the customer’s responsibility to use the product supplied by AquilaBoards in This board has been designed for a quick and easy assembly. Please a secure way following the indicated guidelines.
Page 4
INITIAL ASSEMBLY AND CONFIGURATION nsert female connectors In the bottom part of the Battery you will find two holes where the Battery will be connected with the board. Please, screw the female Battery Female connectors using the screwdriver provided in the tooling kit. bottom connectors ositioning the footstraPs...
Page 5
MAINTENANCE OF THE EQUIPMENT It is crucial to carry a proper and easy maintenance for a long-lasting use of your jetboard. Have a look to the Full User’s Manual at your login section on www.onean.com/my-account to check all the maintenance guidelines: •...
Battery). Make sure the Wireless Controller is totally off (no LEDs). Display 1. Place the Drop over the Onean logo and press on it, as indicated in the following image. Instead of placing the Drop, you can also place a magnet, like the leash magnet, over the Onean logo and press the...
The Battery can not power the turbines. Check and tighten the battery´s female connectors and board´s male connectors. In case that the failure presists, contact your nearest dealer or Onean. eash ailure This means the Leash magnet is not placed on the killswitch. You only have to position it on its place and continue riding.
Do not operate this • Do not operate in areas of high current or waves. The Twin is not product alone. meant to be used to surf waves. In case of being tilted by a wave, •...
Page 9
Please, take a moment to read this manual before charging your battery CAUTION...
Page 10
CAUTION Onean Battery Pack is a high power Lithium-Ion energy storage system made up of powerful chemical elements. For your safety, it is imperative that you obey the following indications. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Page 11
Unless in charging, protect always the battery´s connectors with the plastic cover. The plastic covers avoid entering water inside the connectors. In case you forget protecting the the battery´s connectors water could damage the battery irreversibly. support@onean.com For any inquiries, please, contact us at...
Page 12
OWNER´S MANUAL Please, take a moment to read this manual before using your charger CAUTION...
Page 13
eatures • 1. Advanced high frequency power supply. • 2. DC output isolated from AC input. • 3. Universal Input 110/220 V, 50 Hz~60 Hz • 4. Charging parameters are insensitive to the AC input line voltage variations. • 5. Completely automatic battery charging: CC, CV •...
Page 14
8. Do not use it in case of deterioration of any of its parts (connectors, cables, housing...). • 9. Recharge the Onean Battery only with the charger provided by Onean. • 10. Do not use the charger for any use other than its intended...
Page 16
We´re here to help www.onean.com support onean.com Find the Full User’s Manual at www.onean.com/my-account/ oneanboards fb.me/oneanboards OneanBoards...
Need help?
Do you have a question about the Twin and is the answer not in the manual?
Questions and answers