Page 3
For this reason, we have prepared this user manual. It will help you to know your new Manta board and to use it correctly. It contains information related to the assembly, care, use and maintenance of your Manta board.
index 1. M .............. 5 5.3. f ................19 ecurity heckS irst Use 5.3.1. s ................19 tart up 2. P acking 5.3.2. t ................19 2.1. M ................. 6 anta oard 5.4. g ............19 etting oUt of the Water 2.2. J ................... 7 5.5.
• Do not lend your equipment to anyone who has not been instructed in the use of the Manta. • When entering the water, you must avoid entering through wave break areas and in case of doing so, you must always place yourself between the board and the wave.
Static push: 500 W 2.6. Remote Control Watertight. Thrust display. Battery display. Pressure sensor Drop. Induction charging. • Frequency: 2.4 GHz • Battery: LiPo 300 mAh 2.7 Grease White grease for battery connectors, blue grease for mechanical maintenance. MANTA USER’S MANUAL...
Page 7
Hard anodized, providing extra corrosion Stainless steel swivels to stop tangles. Custom resistance and an increased surface made security magnet pull system. hardness. 2.15. Future G5 fins 2.11. Handle Hard plastic and fiber G5 fins. Made of highly durable thermoplastic MANTA USER’S MANUAL...
2. Align the holes with the leash insert located on the left hand lower side of the board on the non-slippery surface. 3. Screw the piece to secure it. 3. Fix the screw attaching the fin to the board. Leash screw Screw insert Leash insert MANTA USER’S MANUAL...
Please, screw the female connectors, found in the wireless controller case, in the holes of the bottom part of the battery using the tool provided on the tooling kit. Female Battery bottom connectors Screw insert Footstrap insert MANTA USER’S MANUAL...
Once the battery is placed on the pad, grab it by the upper handle and place in the battery compartment. The blue LED on the front of the board will light up indicating the connection. Visualization Charge% 100% MANTA USER’S MANUAL...
Page 11
6. In order to ease the extraction of the battery, turn the vent one full round counter-clock wise. Pull from the upper handle perpendicularly to extract the battery. 7. Keep the vent always closed in any other moment and do not turn it more than three full turns. MANTA USER’S MANUAL...
Reverse polarity could have some devastating up as the battery is being charged. consequences for the battery. Connector body Battery connectors When the battery is fully charged the LEDs will turn off and you must proceed to disconnect the battery. Charging indicator MANTA USER’S MANUAL...
4.2.1. S ynchronization St Led Linking In order to access the configuration menu, you must follow the following indications. Always with the battery initially disconnected: 1. With controller totally SYNC BATTERY LEDs place drop over the logo. MANTA USER’S MANUAL...
LED of the board display In order to activate the Jet Unit, press on the Drop. The Manta has 3 levels: off on the controller beings to blink. At (0%), 50% power and 100% power.
3. In case of fall, the magnetic key will detach, stopping the jet. Once the rider is back on the board ready to continue its use, the magnetic key should be properly placed again. MANTA USER’S MANUAL...
The board has various security mechanisms that stop it automatically in case • The Manta board is suitable for fresh and salt water use. Ideal conditions are with no wind and flat water. • Engine overheat. •...
Shift the weight towards the side where you intend to turn to ease the movement. The more speed, the easier it is to turn. The board turns like a conventional board. MANTA USER’S MANUAL...
Make sure that the water is deep enough to operate this board, be aware of coral reefs. • Do not operate in areas of high current or waves. The Manta is not meant to be used to surf waves. In case of being tilted by a wave, the rider could suffer severe damages.
Do not impact the turbine or rest the board over it. plastic cover. The plastic covers avoid entering water inside the connector. In case you forget protecting the the battery´s conector water could damage the battery irreversibly. MANTA USER’S MANUAL...
Keep always the female and male charge connectors lubricated. Apply white grease inside the battery´s female charge conector. Then, insert the charger´s male conector into the battery´s female conector to distribute the grease through the charger´s pins. MANTA USER’S MANUAL...
(3) until the end with the allen key SW2,5 provided in the into the pump shaft (A). tooling box. Manually screw the socket set screw (8) to the impeller tool until the end (until it touches the hexagonal screw (3). MANTA USER’S MANUAL...
(A). tooling box. SW 13-14 T-wrench Manually screw the socket set screw (8) to the impeller tool until 1x Allen key SW3 the end (until it touches the hexagonal screw (3). 1x Allen key SW2,5 MANTA USER’S MANUAL...
The content of this drawing and the intellectual property are property of Aquila Boards S.L.U ( Avda. de la Ribera de Axpe nº11B Mod 210, 48950 Erandio, Bizkaia, Spain), and can't be reproduced or used without their explicit written consent MANTA USER’S MANUAL...
Need help?
Do you have a question about the Manta and is the answer not in the manual?
Questions and answers