TP-Link RE210 Quick Installation Manual page 2

2
Using a Web Browser
1 Power On
Plug the Range Extender into a wall outlet
close to your router, and wait until the Power
LED is lit and solid green.
Login
3
Launch a web browser and type
http://tplinkrepeater.net
Use admin (all lowercase) for both Username
and Password to login.
http://tplinkrepeater.net
admin
Username:
admin
Password:
Login Cancel
5 Relocate
Refer to Step 3 of Option 1 to relocate your
Range Extender.
The Range Extender shares the same wireless network name (SSID) and
wireless password as your router.
Troubleshooting and Support
My router has no WPS button, how do i connect
1
the Range Extender?
Your router does not support WPS, please use Option
2 to setup the Range Extender using a web browser.
Why does the WPS LED not change from blinking
2
to solid green after completing Option 2?
• You may have entered the wireless password of your
router incorrectly during the con guration. Please
login to the Extender's web management page, and
double-check your router's wireless password.
All manuals and user guides at all-guides.com
2 Connect
Wired:
Disconnect your computer from all wireless
networks. Connect the Range Extender to your
computer via an Ethernet cable.
Con gure
4
Follow the Quick Setup Wizard to manually con gure the Range Extender.
in the address eld.
A. On the Start screen, click Next.
C. Select your router's 2.4G wireless network
name (SSID) and click Next. If the SSID is
hidden, select the Set SSID and MAC
manually option.
Available Wireless Networks (2.4GHz): 24
E. Select your router's 5GHz wireless network. Click
Next and repeat step D. Click Next to continue.
Range Extender WiFi Network Name(SSID):
• If the RE LED still keeps blinking, please reset the
Extender and go through the con guration
again.
What should I do when the WPS LED is on, but
3
only one band is connected?
It depends on your router capabilities, if either the
2.4G or 5G LED is not on while the Extender
connected to your router/network, press the WPS
button on the router and the Range Extender
again to connect the other band.
Start Choose Region Wireless Settings Review Settings
Main Router/AP Network Status:
WiFi Network Name_2.4GHz: N/A
WiFi Network Name_5GHz: N/A
Connection Status: Disconnected
Please click Next to set up the Range Extender or click Exit to manually con gure the device by yourself.
Exit Next
Start Choose Region Wireless Settings Review Settings
Choose SSID Signal MAC Channel
TP-LINK_2.4GHz_XXX 00-0A-EB-74-06-06 1
√
TP-LINK_XXX 0C-72-2C-B3-A5-2C 1
Set SSID and MAC Manually
Back Rescan
Start Choose Region Wireless Settings Review Settings
Main Router/AP Network (5GHz)
Main Router/AP WiFi Network Name(SSID):
TP-LINK_5GHz_XXX
Main Router/AP MAC Address(BSSID):
00-0A-EB-74-06-06
WiFi Security Option:
Most Secure(WPA-PSK/WPA2-PSK)
Fill in the WiFi Password of your Main 123456789
Router/AP:
Range Extender Network (XXGHz)
Copy from Main Router/AP TP-LINK_5GHz_XXX
Customize TP-LINK_5GHz_XXX_EXT
Back Next
YourNetworkName
and password
Wireless:
Disconnect your Ethernet connection. Click the
Wi-Fi icon on the system tray, select the
Extender's default wireless network name (e.g.
TP-LINK_Extender_XXGHz). No password is
required to connect the rst time.
or
Not connected
Connection are available
Wireless Network Connection
TP-LINK_Extender_XXGHz
Connect automatically
√
B. Choose your region from the Region drop-down
list, and click Next.
Start Choose Region
Region: Please Select Your Region
Please select your own region to prevent illegal usage against the local law.
Exit
D. Enter the main router's Wi-Fi password and
either choose Copy from Main Router/AP
or Customize to create a new network
name for the Extender. Click Next.
Start Choose Region
Main Router/AP Network (2.4GHz)
Main Router/AP WiFi Network Name(SSID):
Security Main Router/AP MAC Address(BSSID):
WiFi Security Option:
WPA-PSK
Fill in the WiFi Password of your Main
WPA-PSK
Router/AP:
Range Extender Network (XXGHz)
Range Extender WiFi Network Name(SSID):
Next
Back
F. Verify your Wireless Settings and click Finish.
Both 2.4G and 5G LEDs should turn on and stay
solid green.
Start Choose Region
Wireless Setting
Main Router/AP WiFi Network Name (2.4GHz):
Main Router/AP WiFi Network Name (5GHz):
Range Extender WiFi Network Name (2.4GHz):
WiFi Security Option:
WiFi Password:
Range Extender WiFi Network Name (5GHz):
WiFi Security Option:
WiFi Password:
Export Settings
YourNetworkName
and password
5G
2.4G
4
What do I do if I cannot access the Extend-
er's web management page?
• Make sure your computer is connected to
the Extender's network.
• Change the computer's xed IP address to
Obtain an IP Address Automatically.
5
How do I restore the Range Extender to its
factory default settings?
While the Range Extender is plugged into a
power outlet, press the Reset button for 5
seconds until all the LEDs ash once.
Connect
Wireless Settings Review Settings
Next
Wireless Settings Review Settings
TP-LINK_2.4GHz_XXX
00-0A-EB-74-06-06
Most Secure(WPA-PSK/WPA2-PSK)
123456789
Copy from Main Router/AP TP-LINK_2.4GHz_XXX
Customize TP-LINK_2.4GHz_XXX_EXT
Next
Wireless Settings Review Settings
TP-LINK_2.4GHz_XXX
TP-LINK_5GHz_XXX
TP-LINK_2.4GHz_XXX_EXT
Most Secure (WPA/WPA2-PSK)
123456789
TP-LINK_5GHz_XXX_EXT
Most Secure (WPA/WPA2-PSK)
123456789
Back Finish