Cleaning Your Alarm - Kidde TRUSENSE SMOKE 3050-VAS10 User Manual

Multi-criteria optical sensor smoke alarm with voice and hardwire interconnect
Table of Contents

Advertisement

14. Cleaning Your Alarm

your Alarm Should be Cleaned at Least Once a year
You can clean the interior of your alarm (sensing chamber) by using compressed air or a vacuum cleaner hose
and blowing or vacuuming through the openings around the perimeter of the alarm. The outside of the alarm
can be wiped with a damp cloth. Use only water to dampen the cloth, use of detergents or cleaners could
damage the alarm.
If the alarm is in Fault mode, the alarm may be in need of cleaning. After cleaning, press the button.
If the fault does not clear, the alarm needs to be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
• Do not paint the unit. Paint will seal the vents and interfere with the sensor's ability to detect smoke.
• Never attempt to disassemble the unit to clean inside. This action will void your warranty.
WARNING: REINSTALL THE ALARM AS SOON AS pOSSIbLE TO ENSURE CONTINUOUS
pROTECTION.
22

Advertisement

Table of Contents
loading

Table of Contents