Advertisement
Loudspeaker System Specifications
Fig. 27 Delay Parameter
Note that these are NOT mis-spelled ON and OFF selections, they are zero
meters and zero feet.
Push in the "Push for DSP" knob to highlight this parameter, see Fig. 28
Fig. 28 Delay Parameter Selected
This can adjust the entire speaker systems signal delay to 33 feet or 10 meters,
in one meter increments. 10 meters/33 feet is approximately 29 ms, and 1
meter/3.28 feet is approximately 2.91 ms. See Fig 29
Fig. 29 Delay Parameter at Maximum
This parameter would normally not be used for live sound on stage situations, but
rather, for when the speaker system is used as a side fill or for delay towers.
Should be set to 0 delay for almost all live sound situations.
Output Parameter
The Output parameter selects either Mix Out or Link Out, see Fig. 30
25
Advertisement
