Controls - Forte 450 Series User Manual

at settings: 41 ℉ (5℃) for fridge, 32 ℉ (0℃) for Fresh zone and 0 ℉ (-18℃) for freezer. If you want
1. First time switching on the appliance or re-supply after power failure, the appliance always works
to adjust the temperature or functions manually, press any button to activate the control panel,
then operations can be conducted.
cycle through temperatures from 34 ℉ (2℃) to 43 ℉ (8℃).
2. Fridge temperature adjustment: press button D on left part of control panel multiple times to
cycle through temperatures from 5 ℉ (-15℃) to -9 ℉ (-25℃).
3. Freezer temperature adjustment: press button E on right part of control panel multiple times to
turned on, fridge will work automatically at temperature setting of 36 ℉ (2℃). Mode expires
4. Fast cooling function: press button B to activate. Button illuminates and fast cooling function is
automatically after 24 hours operation and illumination of button ceases. Mode can be canceled
manually by pressing the button again.
whole appliance will work automatically at settings: fridge at 63 ℉ (17℃), freezer at 0 ℉ (-18℃).
5. Holiday function: press button C to activate. Button illuminates, holiday function is turned on and
illuminates, fridge compartment operates at setting 41 ℉ (5℃) and freezer compartment works at
6. Smart function: press button F on control panel, smart function is turned on and button
setting of 0 ℉ (-18℃). The Fresh zone works at setting of 32 ℉ (0℃).
temperature setting -13 ℉ (-25℃). After 24 hours, fast freezing function stops automatically, or
7. Fast freezing function: press button G, to activate. Button illuminates and freezer will operate at
can be ended manually at any time by pressing the button again.
8. Standby: press button H for 3 seconds to switch off your appliance and the button illuminates
indicating unit is in a standby mode. Press the button H for 3 seconds to switch on your appliance.
the button A again to adjust the temperature. Temperature ranges of fresh zone from 27 ℉ (-3℃)
9. Press the button A to temporary turn the display section corresponding to the fresh zone, press
to 37 ℉ (3℃).
10. Fault display
This appliance has 'fault display & alarm' function. If a fault is detected, there are alarms displayed
on the temperature display, the appliance still cools but a professional service technician should
be called to check the appliance.
F1 – Sensor of fridge evaporator
F2 – Sensor of fresh zone
F3 – Sensor of fridge compartment
F4 – Sensor of freezer compartment
F5 – Sensor of defrosting
2E – Fault of fan/motor in freezer
EC – Communication fault between main panel and display panel.
PS: Main board is located in compressor compartment

CONTROLS

15