Door Reversal - Forte 450 Series User Manual

DOOR REVERSAL

Carefully prise off the cover cap for the top hinge and unscrew the screws fixing the top hinge to the
appliance, you should support the upper door whilst doing this.
Carefully remove the upper door and place it somewhere safe. Note that there are spacers between
the door and the hinge; note how many and their position.
Remove the central hinge by removing the screws fixing it to the appliance; support the lower door
whilst doing this.
Remove the lower door and place it somewhere safe, again noting the position of any spacer pieces.
Swap the previous top hinge to the opposite side at the bottom.
Refit the lower door using any spacers and position the central hinge on the door. After removing the
cover caps, fix the hinge securely to the appliance.
Swap the previous bottom hinge to the opposite side at the top. Refit the upper door and the "new"
top hinge and fix securely to the appliance.
Fit the central cover caps and top hinge cover pieces in place to complete the process.
Unscrew all four slider brackets from the doors and swap them over to the side furthest from the new
hinge positions, before the decor door is fitted.
11