Light Switch; Start-Up Button - VESPA PRIMAVERA 50 2T 2013 Manual

Light switch (01_11)

When the light switch «E» is set to «1», the low-beam light is on. When set to «2», the
high-beam light is activated.
CAUTION
DO NOT PLACE, TRANSPORT OBJECTS AND/OR CLOTHES OVER THE FRONT
HEADLIGHT ASSEMBLY, WHEN THE HEADLIGHT IS TURNED ON OR OFF.
01_11
FAILURE TO FOLLOW THIS PRECAUTION MAY CAUSE OVERHEATING AND
THE SUBSEQUENT FUSION OF THE GLASS.

Start-up button (01_12)

To start the engine, pull either of the two brake levers and then push the button «L».
01_12
16