Bosch Professional GHG 20-63 Original Instructions Manual page 7

If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The heat gun is intended for deforming and welding plastic,
removing coats of paint and heating heat shrink plastic
tubes. It is also suitable for soldering and tinning, melting ad-
hesive bonding and thawing water pipes.
The heat gun is intended for handheld, supervised use.
Product Features
The numbering of the product features refers to the repres-
entation of the heat gun on the graphics page.
Technical Data
Heat gun
Article number
Rated power input
Airflow
Temperature at the nozzle outlet
Temperature measurement accuracy
– at the nozzle outlet
– on the display
Operating temperature of display
Max. permissible ambient temperature in operation
Weight according to EPTA-Procedure 01:2014
Protection class
A) At an ambient temperature of 20 °C
B) The display may go blank if outside the operating temperature.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Typically, the A-weighted sound pressure level of the heat
gun is less than 70 dB(A).
Vibration total values a (triax vector sum) and uncertainty K:
h
2 2
a < 2.5 m/s , K = 1.5 m/s .
h
Bosch Power Tools
W
l/min
A)
°C
B)
°C
°C
kg
(1) Nozzle
(2) Heat shield, removable
(3) Storage surface
(4) On/off switch and power settings
(5) Unit of measurement for temperature
(6) Thermal protection regulation symbol
(7) +/– button
(8) Display
a)
(9) Surface nozzle
a)
(10) Glass protection nozzle
a)
(11) Angle nozzle
a)
(12) Reflector nozzle
a)
(13) Welding wire
a)
(14) Welding shoe
a)
(15) Reducing nozzle
a)
(16) Heat shrink plastic tube
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GHG 20-63 GHG 20-63
3 601 BA6 2.. 3 601 BA6 2D.
3 601 BA6 2G.
2000
150/
150–300/ 100–250/
300–500 200–350
50–630 50–630
±10 %
±5 %
0 to +50 0 to +50
+40
0.65
/Ⅱ
Operation
Starting operation
Pay attention to the mains voltage. The voltage of the
u
electricity source must agree with the specifications on
the type plate of the heat gun.
English | 7
GHG 20-63
3 601 BA6 2C.
1600 1500
100/ 100/
100–250/
200–350
50–600
±10 % ±10 %
±5 % ±5 %
0 to +50
+40 +40
0.65 0.65
/Ⅱ /Ⅱ
1 609 92A 52V | (05.10.2021)