Product Specifications Hot Air Blower GHG 660 LCD GHG 660 LCD PROFESSIONAL PROFESSIONAL Order number 0 601 944 7.. 0 601 944 7.. Voltage [V] 220–240 110–120 Rated input power max. [W] 2300 1400 Air flow approx. [l/min] 250 ... 500 250 ...
6. Bosch is able to ensure flawless functioning of the unit only if the original accessories intended for it When changing from the hot air setting to the cold air setting , the current air flow setting is taken over.
Setting the Air Flow Pre-Stored Programs The unit is delivered with the following four programs: The air flow can be regulated with the air flow button 7. Minimum air flow (approx. 250 l/min) Application Temperature Air Flow Shaping of plastic 250 °C Maximum air flow (approx.
For point soldering, place on the reduction nozzle 15, for the soldering of pipes, the reflector nozzle 12. Bosch stocks an extensive range of accessories (see If solder without flux is used, apply soldering grease or Bosch Accessories catalogue) which offer a wide paste to the location to be soldered.
If the unit should fail despite the care taken in manu- Robert Bosch Limited facture and testing, repair should be carried out by an 14-16 Constellation Drive authorised customer services agent for Bosch power Mairangi Bay tools. Auckland New Zealand For all correspondence and spare parts orders, always ✆...