9. When the tool diagnosis has complete, the judgment of OK or NG as shown in the
example figure below is displayed on the LCD of the Control Panel.
RESULT : NG
10. When the result is displayed and the buzzer sounds, press and hold the power button for
approximately 5 seconds to turn the power OFF. Then turn the Main power switch OFF.
11. After confirming that the power is turned OFF, remove the USB memory. The USB will
contain a compressed file with test results saved.
File name:(inspection time)_(machine S/N)_SYS.zip
Example:20200903133800_CNAH00523_SYS.zip
Note: The compressed test result file cannot be accessed with a computer and is for
use by the factory for additional troubleshooting when necessary.
V01
V01
V01
V01
7
HDD Information
HDD Information
Judgement result