Summary; Applicable Models - Mitsubishi Electric Lossnay LGH-15RX3-E Technical Manual

1. Summary

This is a technical manual relating to the controls for implementing the following systems of the commercial-type Lossnay ( LGH-
-E Series ) .
RX
3
Possible System Configurations
(1) When using only the Lossnay remote controller.
( 2 ) Linking Lossnay and City Multi units.
( 3 ) Linking Mr. Slim ( A-control, K-control ) .
( 4 ) Lossnay central control systems.
( 5 ) Linking with external equipment ( BMS ) .

2. Applicable Models

G Lossnay ( LGH-RX
These models have temperature sensors at RA and OA sides. It can automatically switch to the ventilation mode.
(Lossnay/By-pass)
Model
LGH-15RX -E
3
LGH-25RX -E
3
LGH-35RX -E
3
LGH-50RX -E
3
G Lossnay Remote Controller ( PZ-41SLB-E )
Use when operating from 1 to 15 Lossnay units together at the same time. When using M-NET transmission to operate from
centralised control, use the PZ-52SF-E.
It can start and stop the unit, change fan speed, switch the ventilation mode. It also includes indicators that show errors and
when filter maintenance is required. Refer to page 63.
G Lossnay M-NET Remote Controller ( PZ-52SF-E )
It can be used in combination with Mitsubishi Electric Air conditioner Network system ( MELANS ) . Refer to page 69. Since
this remote controller is supplied the power from the M-NET transmission line, it cannot be linked with Mr. Slim and other
such systems that do not use M-NET.
Please refer to the technical documentation for the other systems: City Multi, Mr. Slim
and the central controller ( MELANS ) .
-E )
3
Model
LGH-80RX -E
3
LGH-100RX -E
3
LGH-150RX -E
3
LGH-200RX -E
3
1