Omlet Eglu Cube Instructions
Hide thumbs Also See for Eglu Cube:

Advertisement

Eglu Cube Run Extension
Instructions

What you have received:

Run Panel Side
Large x2
Firstly unclip the end of your fully assembled run.

Step A - Connect the Run Frame together

Lay the Frame sections on the ground infront of the Eglu Cube. The
curved section of the Frame simply slides onto the two side pieces.
Line up the frame with the run making sure that the flat sides of the
tube ends are against the inside of the run.
Also ensure that the hole in the tube is half way along the first
rectangle in the mesh.
www.omlet.co.uk
Run Panel
Top x1
If you have any problems assembling your Eglu Cube
call us on 0845 450 20 56 or email info@omlet.co.uk
Run Frame
Run Frame
Middle x1
Leg x2
Omlet Limited
Unit 4 Tuthill Park
Wardington
Oxon OX17 1RY
www.omlet.co.uk
info@omlet.co.uk
0845 450 20 56
Fastener
Pack x1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Eglu Cube and is the answer not in the manual?

Questions and answers

Summary of Contents for Omlet Eglu Cube

  • Page 1 Firstly unclip the end of your fully assembled run. Step A - Connect the Run Frame together Lay the Frame sections on the ground infront of the Eglu Cube. The curved section of the Frame simply slides onto the two side pieces.
  • Page 2 Clip the end of your run back on again. If you have any problems assembling your Eglu Cube www.omlet.co.uk call us on 0845 450 20 56 or email info@omlet.co.uk...

Table of Contents