Health Care Device- Bp Monitor (Optional); Troubleshooting The Massage Chair - Luraco iROBOTICS 9 Series User Manual

VI. HEALTH CARE DEVICE (BLOOD PRESSURE MONITOR)
(Optional) About this device
The iRobotics 9 Medical Massage Chair has the capability to operate
an optional health monitoring device. The device measures blood
pressure and heart rate of the user. Connect the blood pressure
monitor to blood pressure port on the side panel of the chair to
charge the device before operating (Refer to Fig.5).
This device is an optional product but is included with the i9 Special
Edition.
VII. TROUBLESHOOTING THE MASSAGE CHAIR
WARNING:
any troubleshooting or service.
Luraco iRobotics 9 Series comes with advanced state-of-the-art
electronics and software technology which support self-diagnostic
features to detect individual failures of critical components in the
massage system. The chair has different LED indicators, which help
the user to narrow down a troubleshooting failure, if any.
See Table 1 below for LED Function/Color Chart. (See Fig. 5 for
side panel)
LED Function/Color
24V Power (Blue)
3V Power (Blue)
Unplug the power cord before attempting
Blue means 24V power supply is good.
The blue LED should be on continuously.
Blue means 3V power supply is good.
The blue LED should be on continuously.
If 24V LED is on, and 3V LED is off, it
means Motherboard power is lost.
Table 1: Power LED Functions
Meaning
30