Daintree GE Current RAIL159 Installation Manual

TR3 Front Lens Shell
BEFORE YOU BEGIN
Read these instructions completely and carefully. If you prefer to have this Installation Instructions
document in other languages, visit our official website at: www.gecurrent.com/transportation
RISK OF ELECTRIC SHOCK
Disconnect Before Servicing or installing product. The LED module must be installed into a signal head with adequate ingress
protection for the location (protection from the weather).
RISQUES DE DÉCHARGES ÉLECTRIQUES
Couper l'alimentation avant le dépannage ou avant l'installation du produit. Le module DEL doit être installé dans une tête de signal
avec une protection adéquate d'entrée pour l'emplacement (protection contre les intempéries).
Prepare Electrical Wiring
Electrical Requirements
• Follow all National Electric Codes (NEC)
and local codes.
Important Information
• Removal of the internal power supply will void your warranty.
• Always WEAR gloves.
• Usage of a plastic and non-powered screwdriver is recommended to prevent lens
damage or scratching.
• DO NOT touch the front shell at ANY TIME without gloves.
• DO NOT rest the front shell on its external surface to avoid scratches.
• Failure to properly follow these instructions may cause signal to malfunction.
• The customer is responsible of the optical validation of the newly installed lens.
• This product is intended solely for the use of rail signaling and is not intended
for use in any other applications.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-005 (A)/NMB-005(A)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
WARNING / AVERTISSEMENT
Installation Guide
RAIL159 | 99003749