Solid State Logic MADI OPTI-COAX Quick Start Manual page 4

Specifications
MADI Coaxial Connections
BNC connectors must conform to IEC 60169-8.
Cable should be 75 Ohm coax to at least Belden 1694F Low Loss Serial Digital Coax
standard. Specification for Belden cable can be found here:
https://edesk.belden.com/products/techdata/metric/pdf/1694F.pdf
SSL recommends that cable assemblies should have a 360º connection between cable
shield and the connector in order to maintain electromagnetic compatibility.
Maximum length 100 m (quality cables, connections and no intermediate connections)
MADI Optical Fibre Connections
Duplex SC multimode sockets
Fibre - Multimode 50/125 μm, OM2 or better according to ISO 11801 standard
Maximum length <1000 m (quality cables, connections and no intermediate connections)
Dimensions
Height
Width
Depth (enclosure only)
Depth (including connectors)
Weight
0.45 kg
Power
100 - 240 V AC, 50/60 Hz, 250 mA Max
123.0 mm (allow for mating connectors, strain
relief and cable bend radius)
43.3 mm
130.0 mm
101.6 mm