9.
WATER CONNECTIONS
Drain plug
Filter
Hot water
outlet
Cold water
inlet
•
suitable for potable water systems.
•
the main water supply line and the water heater.
• Only a gate valve or a ball valve is to be used on the cold water supply.
• No stop taps or check valves are to be used as this will void the warranty and damage the wa-
ter heater.
•
•
heater.
•
COUNTERCLOCKWISE
AND THEN CLEAN AND
REPLACE
Gate or ball
valve on inlet
1. TURN OFF THE WATER
INLET SUPPLY VALVE.
2. OPEN A HOT WATER
TAP TO RELEASE THE
LINE PRESSURE.
Do not reverse the hot outlet and cold
Heater as this will cause your heater to
operate improperly.
12
WARNING
Filter
-