KX-TG5771BXS/KX-TGA570BXS
4.5.6.
Auto Disconnect circuit
Function:
This circuit is used to detect the fact that another telephone connected to the same line is OFF-HOOK while the unit is in a
receiving status or OGM transmitting status.
Circuit Operation:
The voltage of pin 90 of IC501 is monitored. If a parallel-connected telephone is put into OFF-HOOK status, the presence/
absence of a parallel connection is determined when the voltage changes by 0.2 V or more. When the set detects the parallel-
connected telephone is OFF-HOOK status, the line is disconnected.
You can enable or disable the Auto Disconnect function.
See Check Record (P.61)
18