The Gf-16 Adjustable Mounting Column - gfm GF-16 Instruction Manual

The GF-16 Adjustable Mounting Column:

2. Bolt the Adjustable Mounting Column to the base dolly. Make sure that the locking
bolts are locked securely.
Tip: The carrying handles on the bazooka should point to the left and right of the
dolly.
Adjustable stabilizing
rods
Locking bolts
3. Connect the 4 Adjustable Stabilizing Rods between the base and the column by
securing each one with a locking pin at the top and bottom of each rod.
Important:
When adjusting the height of the column make sure that the 4
Adjustable Stabilizing Rods can move freely and that they are not
restricted in travel. The Rod Locking Pin found in the middle of each
rod must be removed when adjusting the height and reinserted only
when the column is in the required position.
GF-16 Crane System Instruction Manual
Column drive
Connection
Locking bolts
Rod Locking Pins
Page: 4