Important Information - DURAVIT Blue Moon 700143 Mounting Instructions

Important information

About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
ADVICE! For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NOTE! Local installation regulations and any country-
specific standards must be observed at all times.
Installation information
Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.pro.duravit.com.
NOTE!
If the tray has a base inlet, a pipe interrupt must always
be installed on-site.
> See installation diagram.
Providing for an inspection hatch (Diagram 16)
16
• Area: drain and overflow fittings
• Dimensions of the inspection hatch
for drain fittings: min. 20 x 20 cm
Technische V erbes serungen und optische Ver nderungen an den abgebildeten Pr odukten behalten wir uns vo r.
We reserve the right to mak e techni c al impr ovements and enhance the appearance of the pr
Datum Name Ma§stab
Date Scale
Gezeichnet
08.10.13 Allgaier 1:20
Drafted Closing inspection hatch (Diagram 17)
17
Gepr ft
08.10.13 1:10 X
WLT
Certified
Ge ndert
1:5
• Sealed to avoid spray water
Modified
• Only to be opened with a tool
Seitenansicht
Lateral view
oducts shown.
Artikel-Nr. Zeichnung
# W- T- 000000 - 00 - 0
000000
Drawin g
Model-No.
Name
Schematische Zeichnung mit Rohrunterbr
Bezeichnung
Spezial Ab-und berlaufgarnitur mit Bodenzulauf
Description f r Badewanne
Special waste and overflow with base inle t
for bathtubs
BA_M_BlueMoon_Einbau_Fliesen/21.05.4
echer
5