Table of Contents
Advertisement
Important information
About the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
ADVICE!
For avoiding property damage
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Target group and qualification
The bathtub must only be installed by trained plumbing
engineers.
NOTE! Local installation regulations and any country-
specific standards must be observed at all times.
Installation information
Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
NOTE!
If the tray has a base inlet, a pipe interrupt must always
be installed on-site.
> See installation diagram.
Providing for an inspection hatch (Diagram 16)
16
• Area: drain and overflow fittings
• Dimensions of the inspection hatch
for drain fittings: min. 20 x 20 cm
Technische Verbesserungen und optische VerŠnderungen an den abgebildeten Produkten behalten wir uns vor.
We reserve the right to make technical improvements and enhance the appearance of the products shown.
Datum
Name
Ma§stab
Date
Scale
Gezeichnet
08.10.13
Allgaier
1:20
Drafted
Closing inspection hatch (Diagram 17)
GeprŸft
17
08.10.13
WLT
1:10
X
Certified
GeŠndert
1:5
Modified
• Sealed to avoid spray water
• Only to be opened with a tool
Seitenansicht
Lateral view
Artikel-Nr.
Zeichnung
000000
# W-T-
000000 - 00 - 0
Drawing
Model-No.
Name
Schematische Zeichnung mit Rohrunterbrecher
Bezeichnung
Spezial Ab-und †berlaufgarnitur mit Bodenzulauf
Description
fŸr Badewanne
Special waste and overflow with base inlet
for bathtubs
BA_M_BlueMoon_Einbau_Fliesen/13.11.2
5
Advertisement
Table of Contents
