Advertisement
Operation Manual
AC INPUT
ÂÕ²ÄÍÀ ÍÀÏÐÓÃÀ
POWER ON
DELAY
ÌÅÐÅÆÀ
ÇÀÒÐÈÌÊÀ
AC OUTPUT
ÂÈÕ²ÄÍÀ ÍÀÏÐÓÃÀ
Fig. 1. Control panel
5. DESCRIPTION
Digital display of the output voltage level
« L » - low voltage protection;
« H » - high voltage protection;
« C » - transformer temperature protection
POWER : LED (green) lights up when there is a input voltage
Digital display of the input voltage level
DELAY : LED (yellow)
PROTECTION: LED (red) lights up in case of accident (high/
low voltage protection operation, transformer thermal overload)
Wall mounting holes
Output socket (the STAB SLIM-2000 has 2 output sockets)
Delay selection button (180 or 6 s): while pressing the delay time will be
180 s, when not pressed – 6 seconds
RESET/OFF: power switch with built-in fuse
Built-in power cord
6. MOUNTING
elements durable fastened to the wall!
For securely wall mounting it is necessary to determine the type of wall
material (wood, brick, concrete, drywall, and etc.) for corresponding
fastener selection.
Mounting stabilizer location should be close to the wall outlet, considering the stabilizer power
cord length.
Next, make a mounting fasteners (not included) to the wall, considering the wall mounting holes
location
on the stabilizer rear panel (see Fig. 2).
PROTECTION
ÇÀÕÈÑÒ
Fig. 2. Rear panel
Technical support: www.real-el.com
ENG
STAB SLIM
OUTPUT
180 s
6 s
DELAY
Fig. 3. Side panel
3
Advertisement
