Description; Application; Mounting - Real-El STAB SLIM-300 Operation Manual

Operation Manual

ÂÕ²ÄÍÀ ÍÀÏÐÓÃÀ

ÌÅÐÅÆÀ ÇÀÒÐÈÌÊÀ

ÂÈÕ²ÄÍÀ ÍÀÏÐÓÃÀ
Fig. 1. Control panel

4. DESCRIPTION

 Digital display of the output voltage level
 МЕРЕЖА (Power): LED (green) lights up when there is a input voltage
 Digital display of the input voltage level
 ЗАТРИМКА (Delaying): LED (yellow) blinks at working off delay
 ЗАХИСТ (Protection): LED (red) lights up in case of accident (high/
low voltage protection operation, transformer thermal overload))
 Wall mounting holes
 Output socket (the STAB SLIM-2000 has 2 output sockets)
 Delay selection button (180 or 6 s): while pressing the delay time will be
180 s, when not pressed – 6 seconds
 RESET/OFF: power switch with built-in fuse
 Built-in power cord

5. APPLICATION

Automatic voltage regulator (AVR) is designed for providing various
equipment with high-quality stable electric power supply in conditions of
significant and continuous deviations of voltage and protecting your
equipment against high-voltage and pulsed interference.

6. MOUNTING

Important! Before mountint the regulator, make sure that all fixing
elements durable fastened to the wall!
• For securely wall mounting it is necessary to determine the type of wall material (wood, brick,
concrete, drywall, and etc.) for corresponding fastener selection.
• Mounting stabilizer location should be close to the wall outlet, considering the stabilizer power
cord length.
• Next, make a mounting fasteners (not included) to the wall, considering the wall mounting holes
location  on the stabilizer rear panel (see Fig. 2).
• Then hang the stabilizer on fixing elements.


ÇÀÕÈÑÒ




Fig. 2. Rear panel
Technical support: www.real-el.com
ENG
STAB SLIM

ВИХІДНА НАПРУГА
~220 В ± 8%

180 с

6 с
ЗАТРИМКА ~220 В / 50 Гц


Fig. 3. Side panel
3