Takegawa PC20 Instruction Manual

Product number
Thank you very much for purchasing our products.
Thank you so you will comply with the following matters at the time of use.Before installation, please check your always kit contents.
If there is a point of notice event, Please contact us the dealer of purchase.
◎ If the description, such as photos or Illustration different with this part.
☆ Please read carefully before use ☆
◎ The use of ignoring the instructions that are written in the instruction manual, if an accident or damage has occurred, we can not
assume any responsibility for compensation.
◎ This product installation and use, when a problem occurs to after market goods, guarantee other than this product, also can not
assume any in any such matters.
◎ If it was the case or mounting that has been processed like a product, it will not be covered under warranty.
◎ It is not possible to inquire of the combination of other manufacturers.
◎ Please note that this Kit is designed for exclusive use in the YB-Four equipped with S-Stage, and that it cannot be mounted on
motorcycles with a standard engine or any other motorcycle models.
◎ When ordering repair parts, please quote Item Nos above and reference Nos in the figures in this Manual. Should you have any
questions about the Kit,please kindly contact your local motorcycle dealer.
◎ A standard mirror cannot be installed onto a supplied general-use brake lever & holder. Please separately purchase a mirror of M0x.25.
Caution
When the handling of ignoring this display, property damage and human shows the assumption of what injury.
■ Always try to drive your motorcycle at legal speed on public roads, abiding by the laws.
■ Work only when the engine and muffler are cool. (Otherwise, you will get burned.)
■ Do the installation with right tools. (Otherwise, breakage of parts or injuries to you may take place.)
■ Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Otherwise, these parts may get damaged or fall off, resulting in accidents.)
■ As some products and frames have sharp edges or protruding portions, please work with your hands protected.(Otherwise, you will suffer injuries.)
■ Before riding, always check every hardware like screws for slack. If you find slack ones, screw them securely up to the specified torque.
(Otherwise, improper tightening may cause parts to come off.)
■ Always use new gaskets and packings. And check those parts, to be reused, for wear and damage. If you find worn or damaged parts,
replace them with new ones.
When the handling of ignoring this display people died, shows the contents of the serious injury possibility is
Warning
assumed.
■ If you start the engine, be sure in a well-ventilated place. In the sealed such place, please do not start the engine.
(There is a risk of carbon monoxide poisoning.)
■ During operation, when an abnormality occurs, immediately stop the vehicle in a safe place, please stop running.(It may lead to an accident.)
■ When performing the work, do the work safely stabilize the vehicle in a horizontal location.
(There is a risk of injury vehicle collapsed while working.)
■ Inspection, maintenance, the instruction manual or, inspection methods such as service manuals, to protect the way, should be done
correctly.(unsuitable inspection and maintenance, there is a risk that result to an accident.)
■ When carrying out the inspection and maintenance, etc., if found damaged parts, replace the damaged parts to avoid possible to reuse
the parts. (There is a risk that lead to accidents Continued use.)
■ Plastic bags of product packaging, you can either be stored in a place that is out of reach of children, it should be discarded.
(When the children or wearing, there is a risk of suffocation.)
■ As gasoline is highly flammable, never place it close to fire. Make sure that nothing flammable is near the gasoline. Since vaporized
accumulation of gasoline is at high risk of explosion, work in a well-ventilated place. (Otherwise it may cause a fire.)
◎ Please note. Performance up, the design change, the product and the price in the cost up, etc. are subject to change without notice.
◎ Please be informed that we shall be held harmless against any claim against us whatsoever arising out of use of the products in
racing and the like.
◎ Keep this manual stored until this product is discarded.
① ②
③ ④ ⑤
2022.2.7
Big Carburetor Kit (PC20) Instruction manual
03-05-0243 (Carburetor kit)
03-02-06 (Manifold set)
⑧
⑥ ⑦
⑩
⑨
⑪
CONTACT Address : 3-5-6 Nishikiorihigashi Tondabayashi Osaka JAPAN
TEL: +8-72-25-357 FAX:+8-72-24-5059 e-mail:english@takegawa.co.jp URL http://www.takegawa.co.jp
Please contact with your name and country name provided. (Only English please)
03-05-0243,03-02-06
Product content
Number Product content
 Carburetor ASSY.
※ 2 Intake manifold COMP.
※ 3 Intake manifold gasket
※ 4 Carburetor gasket
※ 5 Socket cap screw, 6x20
※ 6 Socket cap screw, 6x25
7 Funnel spacer
8 Standard High Throttle Kit
9 Brake lever & Holder
0 Fuel tube
※  Hex wrench, 5mm
※ means the parts are a part of a manifold set.
∴ Please order in the repair parts are always repair part number.
If it is not the part number order, you may not be able to order.
Please be forewarned.
It should be noted, In the case of parts that can not be separately
shipment, please order a set part number.
/2
Adaptation model YB-Four
Quantity Item Number
 03-03-0077
 00-00-472
 00-0-059 (2pcs)
 00-03-047
2 00-00-072 (5pcs)
2 00-00-0722 (5pcs)
 00-00-457
 09-02-0222
 06-08-3002
 00-03-0203 (500mm)