Table of Contents
Advertisement
9
4. Fix the suction mount where the vision is not blocked
(Place close to rear-view mirror is recommended) and lock
in place. Do not install the device on airbag or within its
working range.
5. Insert Micro SD card into the Dash Cam
6. Insert Mini USB end of the power cord into the Mini USB
interface/ charging point of the Dash Cam. Connect
charging end of the cable into 12/24V power socket of
vehicle.
7. Adjust the mounting bracket and rotate the camera
direction to get the best view. Ensure 1/4 of the vehicles
bonnet is visible from the bottom of the screen for
alignment.
8. Turn vehicles ignition to accessories and the Dash Cam
will power ON and start recording automatically, you will
hear an audible tone once powered.
9. A red circle will also flash on the screen and a red timer
will appear when recording has started.
10. For the Dash Cam to work it must receive power from
the charging adapter. Once power is removed or turned off
the Dash Cam will save the current file and turn off.
Advertisement
Table of Contents
