INTRODUCTION WELCOME Thank you for purchasing the Gator G427 4.3” Monitor + Reverse Camera. Please ensure that you have read the product manual and instructions in full, prior to installation and use. Failure to do so may result in product failure/damage or incorrect operation and therefore impact the product performance.
TABLE OF CONTENTS INTRODUCTION.................PAGE: 2 PRODUCT FEATURES..............PAGE: 2 PACKAGE COMPONENTS............PAGE: 2 TABLE OF CONTENTS..............PAGE: 3 INSTALLATION OF MONITOR............PAGE: 4 INSTALLING THE CAMERA............PAGE:5-6 TESTING THE REVERSE CAMERA FUNCTION......PAGE:6 MENU FUNCTIONS...............PAGE:7 PRODUCT SPECIFICATIONS............PAGE:8 TECHNICAL ASSISTANCE............PAGE:8 PAGE 3 G427 INSTRUCTION MANUAL...
Page 4
INSTALLATION Installation diagram The video signal is transferred from the camera to the G427 monitor via an RCA cable that will need to be run through the boot, through the passenger compartment to the mirror monitors wired loom run under the dash. From there the power and video signals are sent directly to the monitor. At the rear of the car the camera is powered directly from the reversing tail light.
(through a rubber grommet) and seal the hole with silicone to avoid water leakage. 4.Refit the license plate over the camera bracket using the original bolts/screws. PAGE 5 G427 INSTRUCTION MANUAL...
1.Engage the park brake and turn the ignition key to the on position. DO NOT start the vehicle. 2. Select reverse gear with the gear shift. The monitor will sense the video signal from the camera automatically and will display the camera’s image of the rear of the vehicle. PAGE 6 G427 INSTRUCTION MANUAL...
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, copying or other electronic or mechanical methods, without the prior written permission of the author. PAGE 8 G427 INSTRUCTION MANUAL...