Advertisement
TROUBLESHOOTING
Before calling for service, please review the Troubleshooting list below, since the problem may not
be the product malfunction.
SYMPTOM
Dust and smoke are not
removed.
The discharged air has an
odour.
Smell from a new product
and/or fi lter.
SPECIFICATIONS
Model
Power supply
Fan Speed Adjustment
Fan
Rated Power (W)
Speed
Fan Speed (m
Operation
Standby Power (W)
Recommended Room Size*
Filter type
Cord Length (m)
Dimensions (mm)
Weight (kg)
*1 • The recommended room size is appropriate for operating the product of maximum fan speed.
• The recommended room size is an area in which a given amount of dust particles can
be removed in 30 minutes (according to standards of the Japan Electrical Manufacturers'
Association (JEM1467)).
*2 • The fi lter removes more than 99.97% of particles at least 0.3-microns in size (according to
standards of the Japan Electrical Manufacturers' Association (JEM1467)).
Standby Power
• Clean or replace the fi lter if they appear to be heavily soiled.
(Page 6,8,9)
• Check if the plastic bag is removed from the fi lter.
(Page 6)
• Check to see if the fi lter are heavily soiled.
Replace the fi lter.
• Immediately after removing the plastic bag, a slight odour
may occur.
This odour is not harmful for fi lter performance or human
exposure.
3
/hour)
1
(m
2
)
When the product's power plug is inserted in a wall outlet it consumes standby
power in order to operate electrical circuits. To conserve energy, unplug the power
cord when the product is not in use.
REMEDY (not a malfunction)
220 – 240V ~ 50 – 60Hz
MAX
51
180
400 (W) × 182 (D) × 463 (H)
EN-10
UA-PE30U
MED
SLEEP
30
13
120
60
0.7
~ 21
2
HEPA*
2.0
3.9
Advertisement
