Using Point And Select Navigation; Entering Setup - GE MG25326 User Manual

Interactive Setup

Using Point and Select Navigation

You only need to know one rule when using the remote to access
on-screen menus and control panels: point and select. The point
and select method has two steps.
1. Point to a menu item using the MOVE arrows on the remote.
To point up or down, press the up or down arrows. To point left
or right, press the left or right arrows.
2. Select a menu item by pressing MENU•PROG.
Selecting an item tells the TV's menu system to go ahead and
make the change or go to a place you have indicated.

Entering Setup

The first screen of the Interactive Setup appears automatically
when you turn on your TV for the first time or after a power outage.
1. Press MENU•PROG to begin setup or CLEAR to exit.
SETUP
When first used or after a power
outage, your television needs
to be set up.
Would you like to begin now?
Press MENU to begin setup or
Press CLEAR to exit.
You can also access the Interactive Setup through the Main menu:
1. Press MENU•PROG to bring up the Main menu.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Control
7 Setup
0 Exit
2. Point to Setup and press MENU•PROG . The first Setup screen
comes up, asking you to confirm that you want to begin.
12
•
MENU PROG
CLEAR RESET
MOVE
Point and Select buttons
You can also select a menu item by
entering the item number with the
number buttons on the remote.
Press CLEAR at any time to remove
all displays from the screen and
return to TV viewing.
Many VCR user manuals refer to a
PROGRAM button. The MENU•PROG
button on this remote works as a
PROGRAM button in VCR mode for
GE, RCA and proscan VCRs.