Table of Contents
Advertisement
Accessories
Wire rack
Universal pan
Grill tray
Meat thermometer
5.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
5.2 Sliding accessories into the cooking
compartment
Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.
1.
Turn the accessories so that the notch
rear and is facing downwards.
Insert accessories between the two guide rods for
2.
the shelf position.
Wire rack
Baking tray
E.g. univer-
sal pan or
baking tray
is at the
Place the accessory at the shelf positions with the
3.
pull-out rails and pull out the pull-out rails.
Wire rack
or baking
tray
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catching dripping liquids, e.g. fat when
grilling food on the wire rack.
Grilling food.
To prevent splashes in the cooking compart-
ment, use the grill tray when grilling food. Al-
ways place the grill tray in the universal pan.
High-precision roasting or cooking.
→ "Meat thermometer", Page 13
Insert the wire rack with the open
side facing the appliance door and
the curved lip
Slide the tray, e.g. the universal pan,
in with the sloping edge
appliance door.
Position the accessory so that its
edge is behind the lug
out rail.
Accessories en
facing downwards.
facing the
on the pull-
9
Advertisement
Table of Contents
