Table of Contents
Advertisement
First, push the rail into the middle of the rear
1.
socket
until the rail rests against the cooking
compartment wall, and then push this back
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
17.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
▶
ATTENTION!
The self-cleaning surfaces in the cooking compartment
may be damaged by detaching and attaching the pull-
out rails.
Detach the rails before detaching or attaching the
▶
pull-out rails.
Note: If necessary, you can use pull-out rails on all
levels.
Push on the tab marked PUSH behind the rail, and
1.
push the rail to the rear.
.
until the rail
.
3
4
Keep the PUSH tab pushed back
2.
rail outwards
.
Pull the rail out towards the front until the retainer at
3.
the back unhooks.
Remove the pull-out rail.
4.
Clean the pull-out rail.
5.
→ "Cleaning products", Page 17
17.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
Shelf supports en
and swing the
21
Advertisement
Table of Contents
