Table of Contents
Advertisement
Other Digital functions:
1. Search +
2. Search –
3. Memory
4. DiSEqC
0. 13/18V
#. 22kHz
DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com
Automatically search for the next digital transponder higher in
frequency. Searching is displayed at the bottom of the monitor.
Automatically search for the next digital transponder lower in
frequency. Searching is displayed at the bottom of the monitor.
For storing digital transponders (digital channels - frequencies).
Tune in the "right" frequency before entering this function
(ex. 1650 MHz).
Enter the Memory function (button nr 3) and push Save (button nr 1).
The instrumentet asks: -"SAVE. ARE YOU SURE ?"
Check that the Memoryposition is the right one (displayed at the right
bottom on the monitor). If not, chose a new one with the
knob (0-99). Free positions are named: Pos free
After selecting a position, push button nr 1 (YES).
Notice that even the preselected 13V/18V, 22 kHz on/off will be
memorized.
-
Load a memory-position by pushing the control-button –"Memory"
will appear on top of the LCD and a memory-position will be
shown in the bottom of the LCD-display.
Step between the stored memory-positions with the knob.
Text-editor:
When the channel (frequency) is saved, the Text-editor appears on the
monitor which makes it possible to enter a name for that memory-
position (ex. Digital).
Use the knob to select the first letter (ex. D) and save it with the control-
button. Move to the next letter (ex. i) and so on.
If a mistake is made and wrong letter is saved, simply correct by
pushing button nr 1 (Delete) and the cursor will jump one position
backward.
Chose between the different DiSEqC commands by using the buttons
on the side of the instrument.
Submenu 7 (SWx) shows the extended DiSEqC-commands
(DiSEqC 1.1).
Submenu 8 (Motor) shows the command-list for DiSEqC actuator-
control (DiSEqC 1.2).
Even 13/18V and 22 kHz can be adjusted under the DiSEqC-menu.
Selection of 13V alt. 18V. Chosed position is displayed at the top of the
LCD-display.
22 kHz on/off. Chosed position is displayed at the
top of the LCD-display.
(7)
Advertisement
Table of Contents
