Setting The Coin Size - Amrotec CC-01 User Manual

4. Setting the coin size

Before you start counting, set always the thickness and diameter according the coin size you want to
count.
Note: Smaller coins will rejected but larger coins stay in the machine and may cause jams.
Thickness adjuster
Diameter adjuster
If tokens or other coins need to be count, those are not marked on the scale, set the correct size as
follow:
Note: Do not open or close the Right top cover with open Hopper door!
a) Thickness
Open the right top cover and the hopper door. Turn the Thickness adjuster to maximum. Place the
token under the thickness block and turn the adjuster slowly down until it gently touch the token.
Turn the adjuster backward until the token moves freely, without resistance, between disc and
thickness block.
b) Diameter
Lift up the transport belt. Turn the Diameter adjuster to maximum. Place the token on the transport
track and turn the adjuster slowly narrow until it gently touch the token. Turn the adjuster
backward until the token moves freely and has side clearance of about 0.4 mm.
9 of 17