Table of Contents
Advertisement
5. Coin preparation
Before loading coins into the machine inspect and remove all foreign objects. Also sort off damaged,
lubricated or sticking coins.
6. Operation
Make sure the hopper door is closed and fill the coins in the hopper. Before counting make always
sure the selected settings, denominations and count memories meet your approbations.
Counting
Press "On/Off" key to start the count, or push the coin exit to activate the Quick-change switch. The
CMX10 shows the counted quantity or value. When the count is finished the CMX10 stops
automatically. (You can also press "On/Off" or push again the coin exit to stop the count manually.)
Piece counting
B1
Count
Total
# 1 B
1000
0
1
2
#
It is now possible to
P:
Print the count
M:
Save the count into the memory
C:
Clear the count and bag content
C (long): Clear the count memory of this denomination
On/Off: Count more coins
The CC-03 stops with message "B1 Stop" (or "B2") if the pre-selected stop is reached. The count will
automatically transferred to the memory and the bag content counter will set to zero. Replace the bag
with an empty one.
Note:
Value or piece counting is selectable in Setting menu, option "Counting mode"
Select Denomination
Adjust the thickness and diameter knob to the desired coin size and mount an empty coin bag on the
counting exit.
Press the "0" key several times until the requested denomination / coin number appears.
If the count or bag content were not zero, there will be a warning message: "Are you sure you want to
proceed". If you press "1" (Yes) the two counters will automatically cleared. With "2" (No) the coin
number will not be changed.
After the last coin number "9" a total symbol " appears. It represents the sum of all saved counts and
cannot used for counting.
Value counting
10:45
B1
100
Value
0
Total
100
#
B
0
or
2.00
?
10:45
200.00
0.00
1000
100
1
2
?
10 of 17
Advertisement
Table of Contents
