Table of Contents
Advertisement
1. Introduction and intended use
The CC-03 is a medium to heavy-duty high-speed counter with automatic coin feeding system for
coins and tokens. It is designed to count large volumes of coins standardized for all six US coins. The
pre-selected coin size will be counted while smaller coins are being rejected without slowing down the
counting speed. The count result can be accumulate in value or piece. Besides, variable bag stops
and count memory the CC-03 offers many useful features to meet your requirements.
An electric coin counter is mainly used for processing coins in financial institutions, vending
businesses, amusement parks, payphone businesses, transportation companies, and other
coin-op businesses.
CC-Series Electric Coin Counters count and separate all US coins at a fastest speed into a bag. You can
also roll coins into standard paper wrapper using accessories provided with this machine. Two
independent adjustment knobs on the machine allow users to select coin diameter and thickness for
processed coins or to separate mixed coins
Safety information
•
Always follow basic safety precautions when using this product to reduce risk of injury
from fire or electric shock.
•
Observe all warnings and instructions marked on the product.
•
Do not install or use this device outdoors, near water, or when you are wet. Install the
product securely on a stable surface. See also chapter "Installation"
•
Do never exceed the specified load of the bag, given in chapter "Installation". Otherwise the
machine can tilt and drop down.
•
Do not touch the coin disc when it isin operation. Take extra care oflong hairs or loose
clothing (e.g. tie). If it is caught in the machine, switchoff the power immediately.
•
Unplug the CC-03 from wall outlets before cleaning.
•
Do not clean the machine with chemical cleaner and do not use blowing gas. Otherwise parts
can be damaged or explosion / flash may occur.
•
If the product does not operate normally, see chapter "Troubleshooting".
•
Do not operate the machine when covers are removed. Servicing must be carried out by
qualified service personnel.
Warnings
On the machine and in this manual standardised warning symbols are used. These are explained as
followed:
Warning
Electrical danger
Risk of tilting
Warning of possible danger, such as moving parts.
Warning of possible injuries through electrical shocks
Warning of possible device tilting.
Do not exceed the weight of 40lbs in the counting bag and 15lbs
in the reject bag. (see also Chapter "Installation")
4 of 17
Advertisement
Table of Contents
