Changing The Security Code; Attery; Changing The Battery - GE 27957GE1 User Manual

2.4ghz speakerphone and answering system with cordless handset and call waiting caller id
Table of Contents

Advertisement

Available languages

Available languages

Erase message
Skip message
Turn off/on answering system
Review voice menu options
The base LCD shows REMOTE ACCESS ANSWERING CALL.
TIP: You can bypass the outgoing announcement by pressing any numbered
key on the touch-tone pad while the announcement is playing. Then, you can
enter your security code to access the answering system.

Changing the Security Code

The default security code for accessing the answering system from another
location is 1 2 3.
The security code is set through the programming menu. Refer toTelephone
Set Up for more information.

Changing the Battery

Make sure the telephone is OFF (not inTALK mode) before you replace
battery.
1. Remove the battery compartment cover.
2. Disconnect the battery plug from the jack inside the battery compartment
and remove the battery pack from the handset.
3. Insert the new battery pack and reconnect the battery plug to the jack
inside the compartment.
4. Put the battery compartment cover back on.
5. Place handset in charge cradle to charge. If you don't charge the
handset battery properly (for 16 hours) when you first set up the phone
and/or when you install a new battery pack, the battery's long-term
performance will be compromised.
NOTE: If the battery is not properly installed in the handset, or if the battery
pack is not properly connected to the jack inside the battery compartment,
"NO BATTERY" shows in the display when you place the handset back in the
charge cradle.
0 (during message playback)
3
4
7
39

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

27957

Table of Contents