Table of Contents
Advertisement
Overview
1.8 Suggested Software
RUGGEDCOM ROX II, a corresponding VLAN must also be configured via the mod-
ule's operating system.
1
2
3
4
Figure 1.2
1.8
Suggested Software
RUGGEDCOM ELAN SCADA Application Suite
Note
The RUGGEDCOM ELAN SCADA Application Suite is only available for Linux platforms.
Siemens' RUGGEDCOM ELAN product family solves a wide range of issues related to
communications and data integration, from the substation to the control center and
into the enterprise. The RUGGEDCOM ELAN family of products provide:
•
•
•
•
•
6
2
Switch Fabric Data Plane
Line Module (10/100/1000Base-TX)
RUGGEDCOM APE Module
Gigabit Ethernet (GbE) Network Interfaces
A RUGGEDCOM RX15xx Device With an RUGGEDCOM APE Module Installed
Open, flexible access to all substation and distribution devices, from any autho-
rized user or application
Preservation of investment in legacy devices and control center applications
Protocol conversion/normalization
Support for both SCADA and non-SCADA hosts (e.g. PI historian)
Automated retrieval of fault file data
1
2
RUGGEDCOM APE (Application Processing Engine)
Configuration Manual, 12/2019, C79000-G8976-1121-05
4
3
Advertisement
Table of Contents
