Advertisement
Quick Links
R180 -- Replacement Cartridge
General Description
Shure Model R180 Replacement Cartridge For
Models 588SDX, 515SDX, 515SBGX, 515SBG-18X,
515SBG-18XF, and 515BSLX
This kit contains the following:
• One R180 replacement cartridge
• Two pieces of shrink-wrap tubing (for 515SBGX, 515SBG-8X, 515SBG-8XF, and 515BSLX only)
The following tools are needed to replace the cartridge:
• Long-nose pliers (for 588SDX and 515SDX only)
• A soldering iron of 25 to 40 watts
• Wire cutters (for 515SBGX, 515SBG-18X, 515SBG-18XF, and 515BSLX only)
• #4 (.050 in., 1.3 mm) hex wrench (supplied with 515SBGX, 515SBG-18X, 515SBG-18XF, and 515BSLX only)
1/4
Advertisement
Related Manuals for Shure R180
Summary of Contents for Shure R180
- Page 1 R180 -- Replacement Cartridge General Description Shure Model R180 Replacement Cartridge For Models 588SDX, 515SDX, 515SBGX, 515SBG-18X, 515SBG-18XF, and 515BSLX This kit contains the following: • One R180 replacement cartridge • Two pieces of shrink-wrap tubing (for 515SBGX, 515SBG-8X, 515SBG-8XF, and 515BSLX only) The following tools are needed to replace the cartridge: •...
- Page 2 It is recommended that the following procedure be performed on a table or other flat surface to support the car tridge and case in order to avoid the possibility of breaking the cartridge leads. To replace the R180 cartridge in the 588SDX and 515SDX, proceed as follows: 1. Unscrew and remove the grille (turning counterclockwise).
- Page 3 To replace the R180 cartridge in the 515X Series (except the 515SDX), proceed as follows: 1. Slide the supplied shrink-wrap tubing over both leads on the R180 replacement cartridge.
- Page 4 6. Strip about 1/4-in. (6 mm) of insulation from the end of the lead. 7. Take the lead marked with a red dot on the R180 replacement cartridge and splice it to the taped lead, twisting the stripped ends together.