Siemens S7-300 Manual page 21

Parameters
Section 4.7 of the reference manual describes how analog modules are generally
parameterized.
An overview of the parameters that you can set and their default settings are
shown in the table below.
Table 8 Parameters of the SM 331; AI 8
Parameter
Enable
S
Diagnostic interrupt
S
Hardware interrupt
up on limit violation
Trigger for hardware
interrupt
S
Upper limit value
S
Lower limit value
Diagnostics
S
Group diagnostics
Measurement
S
Measuring Method
S
Measuring Range
S
Interference
Suppression
Product Information on the Manual S7-300 Module Specifications, Edition 11/2002
A5E00213444-02
14 Bit High Speed
Value Range
Yes/no
Yes/no
Constraint possible due to measuring
range.
32511 to –32512
–32512 to 32511
Yes/no
Deactivated
U Voltage
4DMU Current (4-wire transmitter)
2DMU Current (2-wire transmitter)
For the settable measuring ranges of
the input channels, please refer to
section 4.20.3 of the reference manual.
None; 400 Hz; 60 Hz; 50 Hz
Default Para-
Settings meter
Type
No
Dynamic
No
Dynamic
–
Static
No
U
Dynamic
"10 V
50 Hz
Scope
Module
Channel
Channel
group
Channel or
Channel
group group
21