Changing Measurement Units; Low Battery Voltage Alarm - Kayoba 009300 Operating Instructions Manual

EN
Distance measurement mode is activated
automatically at start-up.
FIG. 2

CHANGING MEASUREMENT UNITS

• Press and hold the M button to change
between the measurement units metre
(M) and yard (Y).
• The selected unit is used in distance
measurement mode, scanning mode,
height measurement mode and fog
mode.
FIG. 3
NOTE:
The measurement unit must be set separately
in speed measurement mode.

LOW BATTERY VOLTAGE ALARM

The battery symbol is displayed when the
battery voltage is low.
FIG. 4