L3 Stormscope II Series User Manual page 21

Chapter 3 - Operation
ERROR
Error 41
Processor Fault
Error 42
Processor Fault
Error 43
Invalid Request
Error 44 thru 49
Serial
Communications
Error 50 Illegal
Heading Value
Error 51 Invalid
Message
Error 52 Invalid
Antenna Change
Request
Error 53 thru 54
Communications
Buffer Overload
*F=Fatal, NF=Nonfatal, R=Recoverable, NR=Nonrecoverable (Description
follows table.)
Stormscope WX-500 User's Guide
®
Table 3-1: Error Messages (continued)
FAULT SOURCE
DSP or main
processor
Main processor
MFD
MFD
MFD
MFD
MFD
MFD
TYPE* RECOMMENDED ACTION
F Turn off the unit and see
your dealer for service.
F Turn off the unit and see
your dealer for service.
NF/R See your dealer for ser-
vice if this error occurs
frequently.
NF/R See your dealer for ser-
vice if this error occurs
frequently.
NF/R See your dealer for ser-
vice if this error occurs
frequently.
NF/R See your dealer for ser-
vice if this error occurs
frequently.
NF/R See your dealer for ser-
vice if this error occurs
frequently.
NF/R See your dealer for ser-
vice if this error occurs
frequently.
Error Messages
3-5