Crestron MPS-100 Quick Start Manual

Level 5 Crestron mps-100 System:

1. Turning on the system

by tapping on the
touch screen twice.
2. Select source on left
side of touch screen
( Laptop, DVD, VCR,
or Document Camera).

3. LAPTOP COMPUTER

A.Connect laptop
to input panel
located on top of
podium using the
cable provided. Turn
DISPLAY ON and press LAPTOP button. B.Boot up computer
(Select a key combination on laptop of the FN key, located
in the lower left corner of the keyboard, plus one Function
key, located in the top row of the
computer manufacturers use a different top row key.
example,
to turn on their laptop video output.
4. Turn off system by push "EXIT" button to the right of
screen and tap "YES" on touch screen.
i.

DVD:

1. Turn on DVD.
2. To insert DVD, open tray by accessing the podem and
manually pushing the "Eject/Open" button on front of
the DVD player.
3. Controls for DVD are on podium touchscreen: play,
stop, pause, forward, rewind, previous and next.
4. To access selection controls for DVD, press "DVD MENU"
5. Control from buttons directly on front of DVD player.
6. Eject DVD by pushing "OPEN/CLOSE" button.

VCR:

1. Turn on VCR.
2. To insert tape, check to see if there is a tape
already inside the system by accessing the system and
Dell manufacturer uses the combination of FN + F7
NOTE: If projector is shut down after being on,
it takes time to cool enough to be able to be
turned back on.
keyboard). All
For