Download Print this page

WilTec 61000 Operation Manual page 5

Hide thumbs Also See for 61000:

Advertisement

parts and mounting bolts prior to use. The control handle and power switch must be kept clean,
dry, and free from oil and grease at all times.
Remove adjusting keys and wrenches. Be sure that keys and wrenches are removed from
the tool or machine work surface before operation.
Avoid unintentional starting. Be sure to be prepared to begin work before switching the device
on.
Stay alert. Fully concentrate on what you are doing. Do not use the device when being tired or
under the influence of alcohol, drugs, or medicine.
Before operating the device, check it for damaged parts. Before using any tool, any part
appearing damaged should be carefully checked to determine if it will operate properly and
perform its intended function. Check for alignment and binding of moving parts, any broken parts
or mounting fixtures, and any other condition that may affect proper operation. Make sure that
no damaged or broken parts stay inside the device. Any damaged part should be properly re-
paired or replaced by a qualified technician. Do not use the tool if any switch does not turn it on
and off properly.
Spare parts and accessories. When servicing the device, make sure that service personnel
only use identical replacement parts. Use of any other parts will void the warranty. Only use
parts and accessories intended for use with this tool.
Special warnings when using this electric device
Using this powerful device might lead to particular dangers. Take care to protect yourself and
those around you.
Steel cable
Be sure that the cable is in good condition and attached properly.
Do not use the winch if the cable is frayed.
Do not replace the cable with a cable of lesser strength.
Battery
Ensure that the battery is in good condition.
Avoid contact with battery acid or other contaminants.
Always wear approved eye protection when working on a battery.
Have the engine running when using the winch to avoid running the battery down.
Stand back
Stay out of the direct line of direction that the cable is pulling, as it is whiplashed along this line
when slipping or breaking. While using the device, keep your hands, clothes, hair, and jewellery
away from the winch.
Call a spotter in to ensure safe use of the winch. Make sure that this person is out of the way of
the vehicle and cable before switching on the winch.
Power limits
Do not try to exceed the pulling limits of this winch.
Never use the hand crank to "assist" the winch. This would cause damages to the winch and
might lead to injuries.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61000–61002, 61769
Page 5
10
2021-1

Advertisement

loading

This manual is also suitable for:

610016100261769