Advertisement
Quick Links
PDMICUSB6 USB Recording Microphone
Before using the PDMICUSB6 in your audio or communications
application you must confirm that the computer's operating system
recognizes the PDMICUSB6.
Windows XP recognition instructions
1. Connect the PDMICUSB6 to the computer by using the supplied USB
cable
2. The PDMICUSB6 will be automatically installed and recognized as a
windows audio device.
3. Go to the Start Menu, select Control Panel.
4. Select "Sounds, Speech, and Audio Devices"
Advertisement
Related Manuals for Pyle PDMICUSB6
Summary of Contents for Pyle PDMICUSB6
- Page 1 PDMICUSB6. Windows XP recognition instructions 1. Connect the PDMICUSB6 to the computer by using the supplied USB cable 2. The PDMICUSB6 will be automatically installed and recognized as a windows audio device.
- Page 2 5. Select “Sounds and Audio Devices” 6. Select the “Audio” tab. Confirm that under the “Sound recording” section the “C-Media USB Audio Device” is selected. (The “Sound playback” should remain your usual sound output device).
- Page 3 “1 AGC” or “Mic boost”. 9. Launch your audio recording software. 10. Adjust the position of the PDMICUSB6 from the sound source to get the best results. 11. Locate the preferences in your audio program and select the “C-Media USB Audio Device”.
- Page 4 Mac OSX Recognition Instructions 1. Connect the PDMICUSB6 to the computer by using the USB cable. 2. The PDMICUSB6 will be automatically installed and recognized as a windows audio device. 3. Go to the Apple Menu and locate “System Preferences”.
- Page 5 (The “Sound playback” should remain your usual sound output device). 7. Position the PDMICUSB6 4 to 6 inches away from your source (your mouth or music instrument). 8. Test the PDMICUSB6 by speaking or playing into the microphone.