Physical Installation 1. Connect an Ethernet cable Connect one end of an Ethernet cable to the LAN port located on the ICA-106 real panel and attach the other end to the network device (hub or switch). 2. Attach the external power supply Connect the provided power adapter to the ICA-106’s connector labeled...
Configuration PLANET ICA-106 provides GUI (Web based, Graphical User Interface) for machine management and maintenance. To start the ICA-106 web configuration, please have the proper web browser installed on computer for web management • Microsoft Internet Explorer 5.5 or higher Default IP address of ICA-106 is 192.168.0.20.
• The ICA-106 must be installed and powered ON. • If the ICA-106’s default IP Address (192.168.0.20) is already used by another device, the other device must be turned OFF until the ICA-106 is allocated a new IP Address during configuration.
Further Configuration If you want to configure more detail settings of ICA-106, please refer to our user’s manual in the CD. If you have any difficulty on resolving the problem while installing or using the camera, please feel free to contact PLANET for support.