The product complies with the European Safety Standards and the European Standard Electromagnetic Compatibility (EMC). These cover the essential requirements
Page 1
RAIL SUITE RAL15-AU 8/ 54717/0 Issue 1 The product complies with the European Safety Standards and the European Standard Electromagnetic Compatibility (EMC). These cover the essential requirements of EEC Directives.
Page 3
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Important Safety Advice General When using electrical appliances, basic Unpack the heater carefully and retain the precautions should be followed to packaging for possible future use, in the reduce the risk of fire, electric shock, and injury to persons, including the following: event of moving or returning the fire to your...
Page 4
Controls: See Fig. 2 Icon Function Description Power Press to turn unit Off or On. • Unit Off Press to turn everything Off. Press again to turn unit On with previous settings. • Unit On Press to turn unit On with previous settings. - If the flame effect was On, the flame will turn on and the previous heat setting will be activated (On or Off).
Resetting the Temperature Cutout Switch Should the heater overheat, an automatic cutout will turn the heater off. It will not come back on without being reset. To reset the cutout switch, unplug the unit and wait 5 minutes before plugging it back in. Remote Control- See Fig.
After Sales Service Should you require after sales service or should you need to purchase any spares, please contact the retailer from whom the appliance was purchased or contact the service number relevant to your country on the warranty card. Please do not return a faulty product to us in the first instance as this may result in loss or damage and delay in providing you with a satisfactory service.
Need help?
Do you have a question about the RAL15-AU and is the answer not in the manual?
Questions and answers